|
Piping Products • Nut, Bolt, Gasket Kits |
|
|
|
|
|
|
|
 |
Spec Sheet for NBG-R-SS |
|
|
|
Always verify that you have the most recent product specifications
or other documentation prior to the installation of these products. |
 BACK |
|
|
| Features: |
- For ANSI 150# Flanges
- Lengths for Joining Two Flanges*
- Red Rubber (Styrene-Butadiene or SBR) Gasket
- 304 & 316 Stainless Steel Hardware
- Hardware Finish: Material Finish
- Sizes: 3" to 16"
| | Standards: |
- Gaskets:
- Meets ASME B16.21 for 150# Gaskets
- Dimensions: ASME B16.5
- Cap Screws:
- Material - ASTM F593 Grp 1 (304) or 2 (316)
- Heat Treatment: Condition CW
- Dimensions - ASME B18.2.1
- Thread - Class 2A
- Nuts:
- Material - ASTM F594 Grp 1 (304) or 2 (316)
- Dimensions - ASME B18.2.2
- Thread - Class 2B
| | Properties**: |
- Gaskets:
- Max. Temperature: 170°F (77°C)
- Min. Temperature: -20°F (-29°C)
- Max. Pressure: 200 PSIG (13.8 Bar)
- Max Pressure x Temperature (PxT) - 20,000 (°F x PSIG)
- Durometer Hardness: 75 Shore A±5
- Tensile: 400 PSI
- Elongation: 150%
- Compression Set (22 Hrs @ 158°F): 35%
- Heat Aging (94 Hrs @ 158°F):
- Change in Hardness: +5 Shore A
- Change in Tensile: -15%
- Change in Elongation: -35%
- Finish: Smooth
- Cap Screws:
- Tensile - 100 to 150 KSI (5/8"), 85 to 140 KSI (3/4" to 1")
- Hardness - B95 to C32 (5/8"), B80 to C32 (3/4" to 1")
- Yield - 65 KSI (5/8"), 45 KSI (3/4" to 1")
* Based on 1/16" raised face and 1/8" gasket** Gasket properties and application parameters shown on this data sheet are typical. Failure to select proper sealing products could result in property damage and/or serious personal injury. |
|
|
|
|
