|
Piping Products • Nut, Bolt, Gasket Kits |
|
|
|
|
|
|
|
 |
Spec Sheet for NBG-NA-Z |
|
|
|
Always verify that you have the most recent product specifications
or other documentation prior to the installation of these products. |
 BACK |
|
|
| Features: |
- For ANSI 150# & 300 Flanges
- Full Face & Ring Style
- 1/16" & 1/8" Thickness
- Lengths for Joining Two Flanges*
- Non-Asbestos Gasket (Aramid & Other Synthetic Fibers Bonded with Nitrile Rubber)
- Carbon Steel Steel Hardware
- Hardware Finish: Zinc Plated
- Sizes: 1/2" to 14" **
| | Standards: |
- Gaskets:
- Meets ASME B16.21 for 150# & 300# Gaskets
- Dimensions: ASME B16.5
- Bolts:
- Material - ASTM A307A Grade A
- Dimensions - ASME B18.2.1
- Thread - Class 2A
- Nuts:
- Material - SAE J995 Grade 2
- Dimensions - ASME B18.2.2
- Thread - Class 2B
| | Properties***: |
- Gaskets
- Max. Temperature: 750°F (400°C)
- Max. Continuous Temperature: 460°F (240°C)
- Max. Pressure: 1595 PSI (110 Bar)
- Max. Continuos Pressure: 725 (50 Bar)
- Max. Pressure for Saturated Steam: 75 PSI
- ASTM ASTM F104 Line Call Out: F712120E22M5
- Density: 109 lb/ft³ (1.75 gm/cc)
- Compressibility: 7-17%
- Recovery: min 45%
- Tensile Strength Across Grain: 1670 psi (11.5 N/mm²)
- Ignition Loss: max 34%
- Creep Relaxation: 25%
- Sealability at 1000 PSI: 0.25 ml/h
- Finish: Smooth
- Bolts:
- Tensile - 60 KSI Minimum
- Elongation: 18% Minimum
- Hardness: 69 - 100 Rb
* Based on 1/16" raised face and 1/8" gasket** Not all configurations are available in all sizes. Please see the part number list on the back page *** Gasket properties and application parameters shown on this data sheet are typical. Failure to select proper sealing products could result in property damage and/or serious personal injury. |
|
|
|
|
Figure X440
Figure 220AM
Figure 310AM/
311AM
Figure 600C/
601C
Figure 732 (Lug)
/731 (Wafer)
Figure HPA-Z.jpg)